Seam sealing following repair, side damage - AR97.10-P-4000-03SX

REPAIR MATERIALS

Number	Designation	Order number
BR00.45-Z-1003-01A	White sealing compound, 310 ml, DBL 6069.20	A 001 989 63 20
BR00.45-Z-1041-01A	Seam sealant, sprayable 310 ml	A 002 989 84 20

1 Seal spot welds and rivets in repaired area with seam sealant material.

Insert plastic plugs and rubber grommets with sealing compound.

Keep sealant out of threads on weld nuts and threaded bolts by masking or covering with cardboard sleeves. Also keep drain openings and contact surfaces for axle attachments, windows and detachable parts free of sealant.

It is necessary to seal accessible spot weld flanges on both sides.

If accessible from one side, only seal corresponding surface. Observe standard seals!

Area of A-pillar on longitudinal member and left outer connection element

Fig 1: Identifying Longitudinal Member A-Pillar Sealing Area

Courtesy of MERCEDES-BENZ USA

Area of left inner A-pillar

Fig 2: Identifying Left Inner A-Pillar Sealing Area

Courtesy of MERCEDES-BENZ USA

Area of left A-pillar paneling

Fig 3: Identifying Left A-Pillar Paneling Sealing Area

Courtesy of MERCEDES-BENZ USA

Area of B-pillar with left inner longitudinal member

Fig 4: Identifying B-Pillar With Left Inner Longitudinal Member Sealing Area

Courtesy of MERCEDES-BENZ USA

Area of entire left outer side longitudinal member

Fig 5: Identifying Left Outer Side Longitudinal Member Sealing Area

Courtesy of MERCEDES-BENZ USA

Area of entire left rear fender

Fig 6: Identifying Left Rear Fender Sealing Area

Courtesy of MERCEDES-BENZ USA

Area of rear fender, side paneling below bumper and left taillamp cutout

Fig 7: Identifying Rear Fender, Side Paneling Below Bumper And Left Taillamp Cutout Sealing Area

Courtesy of MERCEDES-BENZ USA

Overall underfloor area

Fig 8: Identifying Underfloor Sealing Area

Courtesy of MERCEDES-BENZ USA