Align windshield in body opening - AR67.10-P-1000-04SX

MODIFICATION NOTES

11.5.06

Distance between top edge of window and front edge of roof

Model 221

*BE67.10-P-1001-01F

TEST AND ADJUSTMENT VALUES FOR WINDSHIELD

Number	Designation			Model 216	Model 221
BE67.10-P-1001-01F	Distance between top edge of window and front edge of roof	Dimension "A"	mm	5 (±0.5)	5 (±0.5)
		See picture		AR67.10-P-1000-04 G	AR67.10-P-1000-04 G

Fig 1: Identifying Feeler Gauge (129 589 03 21 00)

Courtesy of MERCEDES-BENZ USA

1. Install windshield (1) on windshield rubber spacers on body flange with aid of helper, align between upper edge of window and front edge of roof (A) and center at side.
   Fig 2: Identifying Distance Between Top Edge Of Window And Front Edge Of Roof

   Courtesy of MERCEDES-BENZ USA
2. Attach suitable strips of adhesive tape (arrows) and cut at upper edge of shaped rubber gasket on windshield (1).
3. Remove windshield (1) from body flange with aid of helper.
   Fig 3: Locating Strips Of Adhesive Tape On Windshield

   Courtesy of MERCEDES-BENZ USA