Install PTS warning indicator/interior protection wiring harness in headliner - AR68.30-P-4305-14SX
REPAIR MATERIALS
| Number | Designation | Order number |
|---|---|---|
| BR00.45-Z-1071-02A | Adhesive tape roll, gray Tesa tape, 50 meters 0.3X50, 236 mm | A 001 989 17 85 |
Shown on model 221. 0 without code (414) Power glass tilting/sliding roof, without code (413) Panoramic glass roof with top sliding roof
- Route PTS warning indicator/interior protection wiring harness (4) along recess starting at tieout (arrow).
The headliner (1) has a recess for installing the wiring harness.
- Glue PTS warning indicator/interior protection wiring harness (4) to headliner (1) with approx. 10 cm long strips of adhesive tape as illustrated.
The strips of adhesive tape should not be glued beyond the dotted line on the headliner (1), otherwise the function of the right windowbag can be influenced. Press on strips of adhesive tape firmly, otherwise PTS warning indicator/interior protection wiring harness (4) can detach from headliner (1).