LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2008 >> S550 Base >> Repair and Diagnosis >> General Information >> OEM General Information >> Overall Vehicle -- Testing & Repair -- S-Class (221) >> Testing & Repair >> Lift/jack up vehicle - AR00.60-P-1000GZ

Lift/jack up vehicle - AR00.60-P-1000GZ

MODEL 164, 166 

Shown on model 164.1 

Fig 1: Lifting/Jacking Up Vehicle
G07648804Courtesy of MERCEDES-BENZ USA
  Lift/lower vehicle     
DANGER Risk of death  caused by vehicle slipping or toppling off of the lifting platform. Align vehicle between columns of vehicle lift and position four support plates at vehicle lift support points specified by vehicle manufacturer. AS00.00-Z-0010-01A
DANGER Risk of accident  caused by vehicle starting off on its own when jacked up. Risk of injury  caused by rotating parts when working on running engine or drive train. Ensure that supports are in a safe condition. An authorized person must occupy the driver seat.
Wear closed and snug-fitting work clothes.
Do not touch hot or rotating parts.
AS00.00-Z-0008-01A
1 Align vehicle between the columns of the lifting platform and position the four support plates at the lift support points of the body IMPORTANT The vehicle must be driven onto a drive-on lifting platform in order to remove or install the underfloor paneling at the sides.  
2 Adapt the support plates of the lifting platform support arms to match the height of the vehicle IMPORTANT Turn support plates until they contact the lift support points on the body.
NOTES Vehicle lift supports must be properly attached at the lift support points at the vehicle intended for this. Otherwise damage occurs to the vehicle longitudinal members.
 
3 Secure vehicle on lifting platform against falling over IMPORTANT Only when removing major assemblies (e.g. engine, front axle carriers, axles). AR00.60-P-0100GZ 
    SPECIAL TOOL Model 164 vehicle lift safety device Figure
    SPECIAL TOOL Model 166 vehicle lift safety device Figure
4 Raise vehicle with vehicle lift    
5 Lower vehicle in reverse order    
  Jack up/lower vehicle     
6 Lift vehicle with pit lift or floor jack NOTES Only position post of pit lift or floor jack at front axle lift support point and rear axle lift support point. Otherwise damage to axles, major assemblies or the body occurs.  
7 Secure the vehicle against tilting and toppling. IMPORTANT Position jack stand under the body lift support points.  
8 Lower vehicle in reverse order    
Fig 2: Identifying Vehicle Lift Safety Device (169 589 02 31 00)
G07648805Courtesy of MERCEDES-BENZ USA
Fig 3: Identifying Vehicle Lift Safety Device (171 589 01 31 00)
G07648806Courtesy of MERCEDES-BENZ USA