Wiring diagram, fuel injection and ignition system ME-SFI - PE07.61-P-2000-97SAS
ENGINE 156 in MODEL 221.0 /1 exhaust system
| Code: | Designation: | Position: |
|---|---|---|
| A0 | Color code key | |
| B4/3 | Fuel tank pressure sensor | |
| G3/3 | Left O2 sensor upstream of TWC [KAT] | |
| G3/3x1 | Left O2 sensor upstream of TWC [KAT] connector | |
| G3/4 | Right O2 sensor upstream of TWC [KAT] | |
| G3/4x1 | Right O2 sensor upstream of TWC [KAT] connector | |
| G3/5 | Left O2 sensor downstream of TWC [KAT] | |
| G3/6 | Right O2 sensor downstream of TWC [KAT] | |
| N10/1 | Front SAM control unit with fuse and relay module | |
| N3/10 | ME-SFI [ME] control unit | |
| N3/10 | ME-SFI [ME] control unit | |
| N3/10 | ME-SFI [ME] control unit | |
| U1 | Valid for USA | |
| Y32 | Air pump switchover valve | |
| Y58/1 | Purge control valve | |
| Y58/4 | Activated charcoal filter shutoff valve | |
| Z5 | Connector sleeve (solder connector in harness) | |
| Z7/36 | Circuit 87 M2e connector sleeve | |
| Z7/36 | Circuit 87 M2e connector sleeve | |
| Z7/5 | Circuit 87 connector sleeve |