Electric wiring diagram for panoramic sliding roof - PE77.20-P-2200-97SAA
MODEL 221.1 with CODE (413) Panoramic glass roof with top sliding roof as of model year 09 /AEJ08 control unit A98
| Code: | Designation: | Position: |
|---|---|---|
| A0 | Color code key | 23L |
| A98 | Panoramic sliding roof control module | 4A |
| A98 | Panoramic sliding roof control module | 11A |
| A98b1 | Hall sensor 1, panoramic sliding roof | 15A |
| A98b2 | Hall sensor 2, panoramic sliding roof | 16A |
| A98m1 | Panoramic sliding roof motor | 17A |
| A98n1 | Panoramic sliding roof control unit | 8A |
| CAN | B Interior CAN | 9K |
| M54 | Front roller sun blind motor | 18L |
| M54/1 | Rear roller sun blind motor | 13L |
| M54/1b1 | Rear roller sun blind Hall sensor 1 | 14L |
| M54/1b2 | Rear roller sun blind Hall sensor 2 | 13L |
| M54/1m1 | Rear roller sun blind motor | 12L |
| M54b1 | Front roller sun blind Hall sensor 1 | 19L |
| M54b2 | Front roller sun blind Hall sensor 2 | 19L |
| M54m1 | Front roller sun blind motor | 16L |
| N10/2 | Rear SAM control unit with fuse and relay module | 3L |
| W17 | Ground (right rear seat) | 7L |
| X25/8 | Overhead control panel and FFS [RBA] connector | 1H |
| X30/33 | Right interior CAN/FFS [RBA] voltage distributor connector | 9L |
| Z7/80 | Panoramic sliding sunroof circuit 30 connector sleeve | 1E |
| Z7/80 | Panoramic sliding sunroof circuit 30 connector sleeve | 18E |
| Z7/81 | Panoramic sliding sunroof circuit 31 connector sleeve | 7E |
| Z7/81 | Panoramic sliding sunroof circuit 31 connector sleeve | 17E |
| Z7/82 | K-line interface connector sleeve | 16E |