Notes on removal/installation of windshield - AH67.10-P-1000-01P
WARNING: This page does not describe the selected car, but rather 203 other vehicles, including the 2020 Mercedes-Benz SLC300, 2020 Mercedes-Benz SL550, 2020 Mercedes-Benz SL450, 2020 Mercedes-Benz S65 AMG, and 2020 Mercedes-Benz GLA250. However, it is still accessible from the selected car via links, so may be relevant.
MODEL 117, 156, 166, 168, 169, 170, 171, 172, 176, 190, 197, 202, 203, 204, 205, 207, 209, 210, 211, 212, 216.3, 217, 218, 219, 221.0/1, 222, 230.4, 231, 240, 242, 245.2, 246, 292, 414.700, 453
The primer must flash off for at least 10 minutes.
Otherwise the adhesive effect of the adhesive material will be impaired.
The side window in the driver door must be open during the curing time of the adhesive material.
Otherwise the windshield may be pushed outward by the resulting air pressure when the doors are closed.
The windshield must be positioned within a period of 10 minutes onto the body flange.
Otherwise the adhesive force of the glue starts to decrease.
The bonding area must be absolutely free of dust and grease.
Otherwise the adhesive force of the adhesive material starts to decrease when installing the window.
The drive-away time for the 2-component repair kit is 1 h.
The drive-away time for the 1-component repair kit is 2 h.