Prepare vehicle for performing repair on bodyshell complaint on rear fender - SM63.50-P-1001A

MODEL 220 

	Removing
1	Remove audio gateway control unit	Model 220.0##/1## as of 1.9.03, Vehicles with Media Oriented System Transport [MOST] fiber optic cable Only loosen audio gateway control unit and place to one side.
2	Remove pressurized-type reservoir for dynamic seat control	Model 220.0/1 as of 1.9.02 with code (433) Left dynamic seat, incl. multicontour seat or with code (434) Right dynamic seat, incl. multicontour seat
3	Remove CD player with changer or navigation processor	Model 220.0/1, 215.3 as of 1.9.02 with code (819) CD changer (6CDs) and common bracket for CD changer and navigation processor Loosen CD changer or navigation processor only and then move to one side. The CD changer and navigation processor are mounted on the same bracket.
4	Remove rear bumper	Model 220
5	Remove rear fender liner
6	Remove longitudinal member paneling
7	Remove door sill molding
8	Remove edge guard on door cutout
9	Remove underfloor paneling	Only for repairs on rear right fender.
10	Remove rear seat cushion	Model 220.0/1 with electrically adjustable rear bench seat, code (223) Model 220.875/878 with Vis-a-vis seats
		Model 220.0/1 without code (223) Electrically adjustable rear bench seat and without code (224) Individual rear seats, electrically adjustable, with seat ventilation, seat heater and memory package
		Model 220.0/1 with code (224) Electrically adjustable individual rear seats, with seat ventilation, seat heater and memory package
11	Remove rear passenger compartment side trim panel
12	Remove taillamp
13	Remove ornamental frame from rear window