Assemble vehicle after performing repair on bodyshell complaint on rear fender - SM63.50-P-1002A

MODEL 220 

	Install
1	Install trim frame into rear window
2	Install taillamp
3	Install side paneling in rear passenger compartment
4	Install rear seat cushion	Model 220.0/1 with electrically adjustable rear bench seat, code (223) Model 220.875/878 with Vis-a-vis seats
		Model 220.0/1 without code (223) Electrically adjustable rear bench seat and without code (224) Individual rear seats, electrically adjustable, with seat ventilation, seat heater and memory package
		Model 220.0/1 with code (224) Electrically adjustable individual rear seats, with seat ventilation, seat heater and memory package
5	Install underbody paneling	Only for repairs on rear right fender.
6	Fit edge guard onto door cutout
7	Install door sill molding
8	Install longitudinal member paneling
9	Install rear fender liner
10	Install rear bumper	Model 220
11	Install CD player with changer or navigation processor	Model 220.0/1, 215.3 as of 1.9.02 with code (819) CD changer (6CDs) and common bracket for CD changer and navigation processor Loosen CD changer or navigation processor only and then move to one side. The CD changer and navigation processor are mounted on the same bracket.
12	Install pressurized-type reservoir for dynamic seat control	Model 220.0/1 as of 1.9.02 with code (433) Left dynamic seat, incl. multicontour seat or with code (434) Right dynamic seat, incl. multicontour seat
13	Install audio gateway control unit	Model 220.0##/1## as of 1.9.03, Vehicles with Media Oriented System Transport [MOST] fiber optic cable