LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2008 >> S450 >> Repair and Diagnosis >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> Electrical System, Equipment & Instructions - 221 Chassis - 3 Of 9 >> Basic Knowledge >> Vehicle menu item, function >> Vehicle menu item, function - GF54.30-P-3160SX

Vehicle menu item, function - GF54.30-P-3160SX

MODEL 221.0/1 except CODE (498) Japan version up to Model Year 08 

MODEL 216.3 except CODE (498) Japan version up to Model Year 08 

"Vehicle" menu item shown on model 221 up to 31.8.06 

Fig 1: Display - System Settings Screen
G10110994Courtesy of MERCEDES-BENZ USA

Menu item "Vehicle" of main menu row 

If the "Vehicle" menu item of the main menu row is activated, it is possible to select the "System settings" menu item in the submenu row.

"System settings" menu item 

If the "System settings" menu item is activated in the submenu row, it is possible to select under the following submenu items:

"Display" submenu item in system settings 

If the "Display" submenu item is activated, the following settings can be selected:

"Time" submenu item in system settings 

If the "Time" submenu item is activated, the following settings can be selected:

"Read out" submenu item in system settings 

The reading speed of the read out function can be set as follows:

IMPORTANT Apart from the reading speed, on vehicles with code (494) USA version it is possible to select between the sex (female or male) of the voice reading aloud.

"Linguatronic" submenu item in system settings 

The following settings can be selected for Linguatronic:

"Language" submenu item in system settings 

One of the following languages can be selected for the display in the COMAND display (A40/8):

"Favorite" submenu item in system settings 

With this setting the freely programmable button (A40/9s10) on the front central operating unit (A40/9) can be assigned with one of the following functions:

In addition the following equipment variants are available on except code (494) USA version:

IMPORTANT The scope of the functions available is depends on the special equipment fitted in the vehicle

"Service" submenu item in system settings 

The following settings can be selected via the "Services" submenu:

"Reset" submenu item in system settings 

All adjusted settings are reset to the factory settings by selecting the "Reset" submenu item. This erases all individual settings and all address book entries.

  Cockpit central display, component description   GF54.30-P-6100SX 
  Front central operating unit, component description   GF54.21-P-4500SX