Balancing wheels - AR40.10-P-1040RT

MODEL 251

Fig 1: Identifying Wheel Balance Weight With Retaining Clamp And Self-Adhesive Balance Weight

G10120929

Courtesy of MERCEDES-BENZ USA

	Balancing
	Risk of death caused by vehicle slipping or toppling off of the lifting platform.	Align vehicle between the columns of the lifting platform and position the four support plates at the lifting platform support points specified by the vehicle manufacturer.	AS00.00-Z-0010-01A
	Information on tires/rims		AH40.10-P-9411-01RT
1	Remove wheel balance weight with retaining clip (43a)	If there are several wheel balance weights with retaining clamp, remove them all.
1	Remove wheel balance weight with retaining clip (43a)	Mounting tool	Fig 2
2	Remove self-adhesive wheel balance weight (43b, 43c)	If there are several self-adhesive wheel balance weights, remove them all.
2	Remove self-adhesive wheel balance weight (43b, 43c)	Mounting tool	Fig 2
3.1	Clean disk wheel	If necessary.
4.1	Mount centering sleeve	If the centering sleeve is not already mounted.	AR40.10-P-1040-01A
		DUO-FLEX 2 centering sleeve	*WH58.30-Z-1002-18A
		Conversion kit	*WH58.30-Z-1003-18A
5	Attach disk wheel to stationary balancing machine	Observe information provided by balancing machine manufacturer.
6	Balance disk wheel	Observe information provided by balancing machine manufacturer. The disk wheel's max. permissible residual imbalance is 5 g.
7	Remove disk wheel from stationary balancing machine
8.1	Balance the remaining disk wheels in the same manner	If necessary.

Fig 2: Identifying Assembly Tool (124 589 17 63 00)

G07472757

Courtesy of MERCEDES-BENZ USA

COMMERCIALLY AVAILABLE TOOLS

Number	Designation
WH58.30-Z-1002-18A	Centering sleeve
WH58.30-Z-1003-18A	Conversion kit