LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2008 >> GL450 AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 9 (Mixture Formation - 164 Chassis -- Diesel) >> Testing & Repair >> Remove/install O2 sensor, without BlueTec - AR07.04-P-0080GZB >> Remove/install bottom parts of soundproofing - AR94.30-P-5300GZ

Remove/install bottom parts of soundproofing - AR94.30-P-5300GZ

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 Mercedes-Benz ML350, 2010 Mercedes-Benz ML350, 2009 Mercedes-Benz ML320, 2009 Mercedes-Benz GL320, and 2008 Mercedes-Benz ML320. However, it is still accessible from the selected car via links, so may be relevant.

MODEL 164 with ENGINE 629, 642 

Fig 1: Removing/Installing Bottom Parts Of Soundproofing
G00544398Courtesy of MERCEDES-BENZ OF NORTH AMERICA.
REMOVINGINSTALLING Remove/install
DANGER Risk of death caused by vehicle slipping or toppling off of the lifting platform. Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by vehicle manufacturer. AS00.00-Z-0010-01A
1 Lift vehicle with two-post lift   AR00.60-P-1000GZ
2 Remove bolt (1) 15 bolts (1).  
3.1 Remove front soundproofing bottom section (2) and rear soundproofing bottom section (3) Model 164 without code (430) Offroad package.
The sections can also be removed separately.
 
3.2 Remove underride guard plate Model 164 with code (430) Offroad package AR88.30-P-0010GZ
4 Install in the reverse order