Separate oil pump chain - AR18.10-P-2140-01OM

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 Mercedes-Benz ML350, 2010 Mercedes-Benz ML350, 2009 Mercedes-Benz ML320, 2009 Mercedes-Benz GL320, and 2008 Mercedes-Benz ML320. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Case (602 589 00 98 00)

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

Fig 2: Identifying Thrust Spindle (602 589 05 63 00)

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

Fig 3: Identifying Chain Separating Tool (602 589 02 33 00)

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

Fig 4: Identifying Thrust Pins (602 589 05 63 01)

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

Fig 5: Identifying Thrust Spindle (602 589 04 63 00)

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

Fig 6: Identifying Thrust Pins (602 589 04 63 01)

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

Assemble chain separating tool (1) and thrust spindle (2).

Fig 7: Identifying Chain Separating Tool And Thrust Spindle
Courtesy of MERCEDES-BENZ OF NORTH AMERICA.
Position the chain separating tool (1) and the pressure screw (2) at the link of the oil pump chain (3) and separate the oil pump chain (3).

Fig 8: Identifying Chain Separating Tool, Pressure Screw And Oil Pump Chain
Courtesy of MERCEDES-BENZ OF NORTH AMERICA.