Check oil level - AR18.00-P-3035-01PI
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 Mercedes-Benz ML350, 2010 Mercedes-Benz ML350, 2009 Mercedes-Benz ML320, 2009 Mercedes-Benz GL320, and 2008 Mercedes-Benz ML320. However, it is still accessible from the selected car via links, so may be relevant.
ENGINE LUBRICATION SYSTEM
| Number | Designation | Engine 642.910/920/921 with particulate filter | Engine 642.940/950 with particulate filter | Engine 642.820/822/870/872 with particulate filter | ||
|---|---|---|---|---|---|---|
| BF18.00-P-1001-01S | Engine oil | Filling capacity (oil and filter change) | Liters | 8.5 | 8.5 | 8.5 |
| Specifications for Operating Fluids | Sheet | BB00.40-P-0228-51A | BB00.40-P-0228-51A | BB00.40-P-0228-51A | ||
| Sheet | BB00.40-P-0229-31A | BB00.40-P-0229-31A | BB00.40-P-0229-31A | |||
| Sheet | BB00.40-P-0229-51A | BB00.40-P-0229-51A | BB00.40-P-0229-51A | |||
ENGINE LUBRICATION SYSTEM
| Number | Designation | Engine 642.910/920/921 without particulate filter | Engine 642.940/950 without particulate filter | Engine 642.820/822/870/872 without particulate filter | ||
|---|---|---|---|---|---|---|
| BF18.00-P-1001-01A | Engine oil | Filling capacity (oil and filter change) | Liters | 8.5 | 8.5 | 8.5 |
| Specifications for Operating Fluids | Sheet | BB00.40-P-0228-03A | BB00.40-P-0228-03A | BB00.40-P-0228-03A | ||
| Sheet | BB00.40-P-0228-05A | BB00.40-P-0228-05A | BB00.40-P-0228-05A | |||
| Sheet | BB00.40-P-0228-51A | BB00.40-P-0228-51A | BB00.40-P-0228-51A | |||
| Sheet | BB00.40-P-0229-03A | BB00.40-P-0229-03A | BB00.40-P-0229-03A | |||
| Sheet | BB00.40-P-0229-31A | BB00.40-P-0229-31A | BB00.40-P-0229-31A | |||
| Sheet | BB00.40-P-0229-05A | BB00.40-P-0229-05A | BB00.40-P-0229-05A | |||
| Sheet | BB00.40-P-0229-51A | BB00.40-P-0229-51A | BB00.40-P-0229-51A | |||
- Warm up engine to normal operating temperature.
- Pull dipstick out of guide tube and clean.
In order to avoid measurement errors, vehicle must be standing horizontally on its wheels.
- Insert dipstick fully and leave in this position for at least 3 seconds.
- Pull dipstick out of guide tube and read off oil level; fill with oil as required up to the "Max" mark.