LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2008 >> GL450 AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 13 (Electrical System - Engine - 164 Chassis -- Diesel) >> Special Tools >> 111 589 25 61 00 Valve assembly tools kit - WS05.00-P-3137BA

111 589 25 61 00 Valve assembly tools kit - WS05.00-P-3137BA

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 Mercedes-Benz ML350, 2010 Mercedes-Benz ML350, 2009 Mercedes-Benz ML320, 2009 Mercedes-Benz GL320, and 2008 Mercedes-Benz ML320. However, it is still accessible from the selected car via links, so may be relevant.

FG 05/Set B 

ENGINE 104, 111, 112, 113, 119, 120, 122, 132, 134, 135, 155, 156, 159, 160, 166, 266, 271, 272, 273, 601, 602, 603, 604, 605, 606, 611/980, 612/965/966, 613, 628, 629, 639, 640, 642, 646, 647, 648, 651, 660, 668 

ENGINE 648.960 in MODEL 220 

Separate part  111 589 25 61 06 Thrust fork FG05/Set C WS05.00-P-3137-06C
Separate part  111 589 25 61 12 Fixing bracket FG05/Set C WS05.00-P-3137-12C
Separate part  111 589 25 61 19 Step spacing FG05/Set C WS05.00-P-3137-19C
Separate part  111 589 25 61 03 Lever handle FG05/Set C WS05.00-P-3137-03C
Separate part  111 589 25 61 05 Detent depressor FG05/Set C WS05.00-P-3137-05C

Use: 

Assembly tool for valve springs in a plastic case.

NOTE: For engines with tappet holes in cylinder head assembly of the valve keys is performed automatically by the assembly cartridges.

VEHICLEOFF ROAD VEHICLECARGO VANPASSENGER VAN

Fig 1: Identifying Valve Assembly Tools Kit (111 589 25 61 00)
G07008368Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

Consisting of: 

Part 1  Empty case

Part 2  Impact pin

Part 3  Lever handle

Part 4  Extension

Part 5  Detent depressor for thrust piece

Part 6  Thrust fork for assembly cartridges

Part 7  Thrust piece for detent depressed

Part 8  Assembly cartridge length 83 mm (gasoline engine)

Part 9  Assembly cartridge length 102 mm (diesel engine)

Part 10  Pilot bushing length 28.6 mm (gasoline engine)

Part 11  Pilot bushing length 53 mm (diesel engine)

Part 12  Retaining fork M 6 X 15 mm

Part 13  Retaining fork M 7 X 25 mm

Part 14  Retaining fork M 7 X 30 (bolt length 60 mm)

Part 15  Retaining fork M 8 X 20 mm

Part 16  Threaded hook M6 X 23 mm

Part 17  Threaded hook M7 X 23 mm

Part 18  Threaded hook M8 X 20 mm

Part 19  Grid with a joint bearing

scientia non olet · About LEMON Manuals