Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/ rear-end door or sliding roof. - AS00.00-Z-0011-01A

WARNING: This page does not describe the selected car, but rather 17 other vehicles, including the 2009 Mercedes-Benz CLK63, 2008 Mercedes-Benz CLK63, 2007 Mercedes-Benz CLK63, 2007 Mercedes-Benz CLK550, and 2007 Mercedes-Benz CLK350. However, it is still accessible from the selected car via links, so may be relevant.

When moving components, ensure that no body parts or limbs are within the operating range of moving parts.

Risk of injury

When working on hoods, doors, trunk lids/tailgates and sliding roofs and on their connecting mechanisms, serious injuries can occur due to cutting, jamming or pinching of body parts like fingers and hands.

Safety instructions/precautions

Be careful when working in hazardous areas.
When moving components, secure the movement area of the mechanism to prevent interference.
Use special tool or other means to ensure safe distance to dangerous areas.
Wear protective gloves