Injury hazard of cutting or scraping on sharp vehicle parts - AS00.00-Z-0017-01A
WARNING: This page does not describe the selected car, but rather 17 other vehicles, including the 2009 Mercedes-Benz CLK63, 2008 Mercedes-Benz CLK63, 2007 Mercedes-Benz CLK63, 2007 Mercedes-Benz CLK550, and 2007 Mercedes-Benz CLK350. However, it is still accessible from the selected car via links, so may be relevant.
When working on or in the area of sharp vehicle parts with burrs always wear protective gloves. Deburr repair panels.
Injury hazard
When working on body, superstructure, assembly and chassis parts which cannot be or are not yet deburred due to the production procedure or processing stage, injuries are possible from cutting, scratching or scraping against the burr.
Rules of behavior/protective measures
- Wear protective gloves.
- Deburr repair panels and processed cut edges.