Remove/install button unit on multifunction steering wheel - AR54.25-P-2840GZ
MODEL 164, 251
Shown on the multifunction steering wheel removed with the Voice control system (VCS [SBS]) (code 813)
| Remove/instal | |||
|---|---|---|---|
| Risk of injury caused by performing testing or repair work on airbag or emergency tensioning retractor units. | Store airbag units with deployment side facing up; do not expose to temperatures greater than 100°C. When working on these units, disconnect the power supply. | AS91.00-Z-0001-01A | |
| Risk of explosion caused by oxyhydrogen gas. Risk of poisoning and caustic burns caused by swallowing battery acid. Risk of injury caused by burns to skin and eyes from battery acid or when handling damaged lead-acid batteries | No fire, sparks, open flames or smoking. Wear acid-resistant gloves, clothing and glasses. Only pour battery acid into suitable and appropriately marked containers. | AS54.10-Z-0001-01A | |
| 1 | Disconnect ground cable from battery | Model 164 | AR54.10-P-0003GZ |
| Model 251 | AR54.10-P-0003RT | ||
| 2 | Move steering wheel (1) to horizontal position | ||
| 3 | Remove airbag unit from steering wheel | Model 164 | AR91.60-P-0660GZ |
| Model 251 | AR91.60-P-0660RT | ||
| 4 | Disconnect electrical connectors (4). | ||
| 5 | Unscrew bolt (2) | ||
| 6 | Remove the left steering wheel gear shifter (S110/2) or right steering wheel gear shifter (S111/2) to the rear | ||
| 7 | Remove bolts (3) | ||
| 8 | Remove left multifunction steering wheel button group (S110) or remove right multifunction steering wheel button group (S111) | ||
| 9 | Install in the reverse order |