Displaying time, function - GF54.30-P-3024GZ

MODEL 164 

The time is displayed in analog form via hour and minute hands on the electronic clock (A1p6). The minute hand moves in steps of 1 minute. The hour hand is coupled to the minute pointer by a mechanical gear ratio.

Model 164 except COMAND APS (with navigation) code 527 

The electronic clock (A1p6) is set via the "Settings" menu in the multifunction display (A1p13) using the following buttons on the multifunction steering wheel:

• Scroll forward/back button (S110s1)
• System selection button (S110s3)
• Buttons + and - for setting specific functions and volume control (S111s1)

Model 164 with COMAND APS (with navigation) code 527 

The electronic clock (A1p6) is set automatically.

The time information is placed by the COMAND operating, display and control unit (A40/3) as a message on the Controller Area Network bus Class B (CAN-B) and is read in by the instrument cluster (A1).

If the GPS antenna splitter (A2/5) is receiving signals, these can be used to switch between summer and winter time and vice versa automatically.