LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2008 >> GL320 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 9 (Fuel, Ignition, Engine Control -- Testing & Repair -- 164 Chassis) >> Testing & Repair >> Reduce fuel pressure via service valve - AR07.03-P-1460 >> Reduce fuel pressure through service valve - AR07.03-P-1460-01TMG (ML63 AMG)

Reduce fuel pressure through service valve - AR07.03-P-1460-01TMG (ML63 AMG)

WARNING: This page does not describe the selected car, but rather 28 other vehicles, including the 2012 Mercedes-Benz GL550, 2012 Mercedes-Benz GL450, 2011 Mercedes-Benz ML63, 2011 Mercedes-Benz ML550, and 2011 Mercedes-Benz ML350. However, it is still accessible from the selected car via links, so may be relevant.
DANGER Risk of explosion caused by fuel igniting, risk of poisoning caused by inhaling and swallowing fuel and risk of injury to eyes and skin caused by contact with fuel No fire, sparks, open flames or smoking. Only pour fuels into suitable and appropriately marked containers. Wear protective clothing when handling fuel. AS47.00-Z-0001-01A
Fig 1: Identifying Pressure Hose (119 589 04 63 00)
G04958426Courtesy of MERCEDES-BENZ OF NORTH AMERICA.
Fig 2: Identifying Protective Cap, Pressure Hose And Reservoir
G04958427Courtesy of MERCEDES-BENZ OF NORTH AMERICA.
  1. Unscrew protective cap (1) on fuel distributor service valve.
  2. Insert end of CAUTION pressure hose (01) into a suitable container.
  3. Screw union nut from angled piece (01a) onto service valve.

    IMPORTANT At this point, the service valve is opened and the fuel pressure in the fuel distributor is reduced.

    IMPORTANT Collect feathering-out fuel in a suitable reservoir (3)

  4. Unscrew the union nut of the angled piece (01a) from the service valve.
  5. Screw protective cap (1) onto service valve for fuel distributor.