LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2008 >> GL320 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 6 (Lubricant Capacities/Specifications -- 164 Chassis) >> Capacities & Specifications >> Specified engine oils (service) - overview - BB00.40-P-0223-02A

Specified engine oils (service) - overview - BB00.40-P-0223-02A

WARNING: This page does not describe the selected car, but rather 28 other vehicles, including the 2012 Mercedes-Benz GL550, 2012 Mercedes-Benz GL450, 2011 Mercedes-Benz ML63, 2011 Mercedes-Benz ML550, and 2011 Mercedes-Benz ML350. However, it is still accessible from the selected car via links, so may be relevant.
    For Mercedes-Benz and Smart  
  viscosity classes Sheet 224.1 (passenger-car engines) BB00.40-P-0224-01A 
Sheet 224.2 (commercial-vehicle engines) BB00.40-P-0224-02A
  Single-grade oils Sheet 228.0 BB00.40-P-0228-00A 
Sheet 228.2 BB00.40-P-0228-02A 
  Multigrade oils Sheet 226.9 BB00.40-P-0226-09A
Sheet 228.1 BB00.40-P-0228-01A 
Sheet 228.3 BB00.40-P-0228-03A 
Sheet 228.5 BB00.40-P-0228-05A 
Sheet 228.51 BB00.40-P-0228-51A 
Sheet 229.1 BB00.40-P-0229-01A 
Sheet 229.3 BB00.40-P-0229-03A 
Sheet 229.31 BB00.40-P-0229-31A 
Sheet 229.5 BB00.40-P-0229-05A 
Sheet 229.51 BB00.40-P-0229-51A 

The temperature ranges in the viscosity classes must be observed for the use of the engine oils (see Sheets 224.1 and 224.2)!

Passenger vehicle engines, 

Commercial vehicle engines from the passenger car division,

Single-grade oils are listed on sheets: 228.0, 228.2 - only to be used in summer.

Multigrade oils are listed on sheets 226.9, 228.1/.3/.5/.51, 229.1/.3/.31/.5/.51 - use possible all year round.

Industrial engines from the car sector (series 100, series 600)

MB Specifications for Operating Fluids Sheet 1 226.9 Multi-grade 228.0/.1 Single/ multi-grade 226.9229.3 Single/ multi-grade 229.5 Multi-grade 229.5 Multi-grade 229.5 Multi-grade 229.3 Multi-grade 229.3229 Multi-grade 229.5 Multi-grade 229.5 Multi-grade
Gasoline engines                     
M 155 (SLR) - - - - - -   - -
AMG engines except M 155 (SLR) - - - - - - - - 4 .) -
M 111, 137, 272, 273 - - - - - - -
M 112, 113, 134, 135 - - - - -
M 122, 275 - - - - - - - -
M 160, 160/1, M 285 (Maybach) - - - - - - - - -
M 166 - - - - - - - -
M 266 Turbo, M 271 - - - - - -
Other
M 1xx, M 2xx that are not listed above
- - - - - - -
Diesel engines                    
without  particulate filter (DPF)                    
OM660 - - - - - - - -
OM 640, 642, 646 in model series 639
OM 646, 647, 648
- - -/• -
OM611, 612, 613, 628, 639, 668, 664, 665 - -/• -/•
Other
OM 6xx not listed above
- -/• -/•
with  particulate filter (DPF)                    
OM 629, 639, 640, 646, 647, 648, 664, 665
OM 639 in model series 639 and 906
- - - - - - -
OM
660 (EU3/EU4 not with regulated DPF)
- - - - - - - -
Other
OM 6xx with DPF not listed above
- - - - - - -
Commercial vehicle engines, Industrial engines from the commercial vehicle sector (BR 300, BR 400, BR 500, BR 900)

MB Specifications for Operating Fluids Sheet 1.) 226.9 Multi-grade 228.0/.1 Single/ Multi-grade 226.9229.3 Single/ Multi-grade 229.5 Multi-grade 228.51 ' Multi-grade 229.1 Multi-grade 229.3 Multi-grade 229.31 Multi-grade 229.5 Multi-grade 229.51 Multi-grade
Commercial vehicles, buses without particulate filter                    
BR 300, 400, 500, 900; OM 457, 460 up to and including Euro 3 - ◦/• ◦/• - - - - -
BR 500, 900; OM 457, 460 Euro 4/5 - - ◦/• - - - - -
Gas engines - - - - - - - -
Commercial vehicles, buses with  particulate filter                    
BR 500, 900; OM 457, 460 - - - - - - -

This table only serves as an overview!

The detailed maintenance and oil change regulations can be found in the maintenance booklet for the respective vehicle/ major assembly.

• Enable

◦ Can only be used in exceptional cases or under certain operating conditions/in certain applications.

- Must not be used

  1. Sheets 227.0/. 1 no longer exist! Replaced by engine oils in sheets 228.0/. 1/.2/.3/.5/51.
  2. Use in combination with low-sulfur (S <50 ppm) or sulfur-free (S <10 ppm) fuel! If fuels with sulfur contents of S> 500 ppm are being used, the oil change intervals must be reduced!
  3. Restriction:  Only "Mobil 1 5W-50", SAE 5W-50, sheet 229.3 is approved!
  4. Restriction:  Only engine oils SAE XW-40 may be used!