Permanent speed limiter, function - GF30.30-P-3002GZ

WARNING: This page does not describe the selected car, but rather 28 other vehicles, including the 2012 Mercedes-Benz GL550, 2012 Mercedes-Benz GL450, 2011 Mercedes-Benz ML63, 2011 Mercedes-Benz ML550, and 2011 Mercedes-Benz ML350. However, it is still accessible from the selected car via links, so may be relevant.

ENGINE 113, 156, 272, 629, 642 in MODEL 164.1 with CODE (219) Distronic (DTR)

ENGINE 273, 629, 642 in MODEL 164.8 with code (219) Distronic (DTR)

ENGINE 113, 156, 272, 642 in MODEL 251 with CODE (219) Distronic (DTR)

Indicator in the multifunction display (A1p13) of the instrument cluster (A1)

Fig 1: Identifying Indicator In Multifunction Display (A1P13) Of Instrument Cluster (A1)

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

The Permanent Speed Limiter allows the driver to limit the maximum speed of the vehicle (e.g. for winter tires with a lower permissible maximum speed).

The function of the Permanent Speed Limiter is integrated in the ESP control unit (N47-5).

If the vehicle comes close to the set maximum speed the set maximum speed is maintained by means of an engine intervention.

If the set maximum speed is exceeded a warning message is shown in the multifunction display (A1p13) of the instrument cluster (A1).

When the Permanent Speed Limiter is activated, DISTRONIC or the Variable Speed Limiter can be used (activated) up to the set permanent maximum speed.

Activation/deactivation

The Permanent Speed Limiter is switched on and off via the left or right switch group in the multifunction steering wheel (S110 and S111).

Here the maximum speed can be set in a menu item of the instrument cluster in 10 km/h steps from 160 km/h to 240 km/h.

The Variable Speed Limiter and Permanent Speed Limiter have the sales designation "SPEEDTRONIC".

	CC [TPM] switch, component description	S40 At	GF30.20-P-2100GR
	Component description for the CC [TPM] switch	S40/4 except	GF30.20-P-2100GT