Component description for the accelerator pedal sensor - GF30.20-P-2010GZ
WARNING: This page does not describe the selected car, but rather 28 other vehicles, including the 2012 Mercedes-Benz GL550, 2012 Mercedes-Benz GL450, 2011 Mercedes-Benz ML63, 2011 Mercedes-Benz ML550, and 2011 Mercedes-Benz ML350. However, it is still accessible from the selected car via links, so may be relevant.
ENGINE 642 in MODEL 164.1 /8
ENGINE 642.970 in MODEL 463.303 /340 /341
Illustrated on model 164.1
Location
The accelerator pedal sensor is located in the driver footwell at the right front.
Task
The accelerator pedal sensor detects the accelerator pedal position and supplies a matching voltage signal to the CDI control unit (N3/9).
Design
The accelerator pedal sensor consists of a Hall sensor with an integrated Hall IC.
Function
The Hall sensor integrated in the accelerator pedal sensor detects the current position of the accelerator pedal by means of the permanent magnets fitted on the pedal axis.