Measure cylinder bores - AR01.40-P-9202GZ (ML350, ML500, ML550, GL450, GL550)
WARNING: This page does not describe the selected car, but rather 28 other vehicles, including the 2012 Mercedes-Benz GL550, 2012 Mercedes-Benz GL450, 2011 Mercedes-Benz ML63, 2011 Mercedes-Benz ML550, and 2011 Mercedes-Benz ML350. However, it is still accessible from the selected car via links, so may be relevant.
ENGINE 113, 272, 273 in MODEL 164, 251
| Figure item, etc. | Work instructions | ||
|---|---|---|---|
| 1, 2, 3 | Cylinder bore measuring points | ||
| Fig 2 | |||
| Engine 113: | |||
| Cylinder Ø stage X | *BE01.40-P-1001-01F | ||
| Cylinder Ø stage ⓧ Engine 272, 273: |
*BE01.40-P-1001-01F | ||
| Cylinder Ø stage X | *BE01.40-P-1001-01I | ||
| Cylinder Ø stage ⓧ | *BE01.40-P-1001-01I |
CHECK VALUES FOR CYLINDER BORE
| Number | Designation | Engine 113.960/961/ 962/963/964/ 965/967/968/ 971/980/981/ 982/984/987/ 988/989/990/ 991/992/993/ 995 | ||
|---|---|---|---|---|
| BE01.40-P-1001-01F | Cylinder Ø | Standard marking X | mm | 97.000 to 97.015 |
| Auxiliary stage marking ⓧ | mm | 97.050 to 97.065 | ||
| Repair size | mm | 97.250 to 97.265 | ||
CHECK VALUES FOR CYLINDER BORE
| Number | Designation | Engine 272.91/92/94 | Engine 272.96/97/98/99 | ||
|---|---|---|---|---|---|
| BE01.40-P-1001-01I | Cylinder Ø | Stage X | mm | 88.000 to 88.015 | 92.900 to 92.915 |
| Stage ⓧ | mm | 88.100 to 88.115 | 93.000 to 93.015 | ||
| Repair size | mm | 88.250 to 88.265 | 93.150 to 93.165 | ||
CHECK VALUES FOR CYLINDER BORE
| Number | Designation | Engine 273.92 | Engine 273.96 | ||
|---|---|---|---|---|---|
| BE01.40-P-1001-01I | Cylinder Ø | Stage X | mm | 92.900 to 92.915 | 98.000 to 98.015 |
| Stage ⓧ | mm | 93.000 to 93.015 | 98.100 to 98.115 | ||
| Repair size | mm | 93.150 to 93.165 | 98.250 to 98.265 | ||