LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2008 >> GL320 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 21 (Engine -- Testing & Repair -- 164 Chassis - 2 Of 2) >> Testing & Repair >> Checking cylinder head bolts - AR01.30-P-5800-03 >> Checking cylinder head bolt - AR01.30-P-5800-03AMG (ML63 AMG)

Checking cylinder head bolt - AR01.30-P-5800-03AMG (ML63 AMG)

WARNING: This page does not describe the selected car, but rather 28 other vehicles, including the 2012 Mercedes-Benz GL550, 2012 Mercedes-Benz GL450, 2011 Mercedes-Benz ML63, 2011 Mercedes-Benz ML550, and 2011 Mercedes-Benz ML350. However, it is still accessible from the selected car via links, so may be relevant.

Engine 156 

CYLINDER HEAD/CYLINDER HEAD BOLTS

Number Designation Engine 156
BE01.30-P-1001-04B Cylinder head bolt Thread diameter M 11
Length (L) when new mm 175
Length (L) mm 176, 2
See picture   -

Measure length (L). If the length (L) is greater than the maximum permissible dimension, use new cylinder head bolts.

Fig 1: Identifying Length Of Cylinder Head Bolts
G04958170Courtesy of MERCEDES-BENZ OF NORTH AMERICA.