Notes on application of sealant to timing case cover - AH01.40-P-1000-01VA
WARNING: This page does not describe the selected car, but rather 28 other vehicles, including the 2012 Mercedes-Benz GL550, 2012 Mercedes-Benz GL450, 2011 Mercedes-Benz ML63, 2011 Mercedes-Benz ML550, and 2011 Mercedes-Benz ML350. However, it is still accessible from the selected car via links, so may be relevant.
The broken lines (1) identify the application of the sealing compound.
The sealing surface must be cleaned. The sealing compound may only be coated on the specified surface in the form of a bead with a height and width of 1.5 mm ± 0.5 mm. The sealing compound must be applied within 10 min. The sealing compound bead must not be spread. Only the sealing compound listed in the section Repair products may be used.
Courtesy of MERCEDES-BENZ OF NORTH AMERICA.