Notes on application of sealant to oil pan - AH01.45-P-0001-01VB

WARNING: This page does not describe the selected car, but rather 28 other vehicles, including the 2012 Mercedes-Benz GL550, 2012 Mercedes-Benz GL450, 2011 Mercedes-Benz ML63, 2011 Mercedes-Benz ML550, and 2011 Mercedes-Benz ML350. However, it is still accessible from the selected car via links, so may be relevant.

Engine 272

MODIFICATION NOTES

28.2.06

Sealant path for adapted to specifications of the Development Department

Engine 272

Oil pan with rear sump

The lines (A) identify the sealant beads.

The sealing surface must be cleaned. The sealant must only be applied to the specified surface in the form of a bead and a height and width of 2.0 mm (±0.5 mm).

The sealant must be applied within 10 min. The sealant bead must not be spread. Only the sealant listed in the Repair Products may be used.

Fig 1: Identifying Sealant Beads - Oil Pan With Rear Sump

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

Oil pan with front sump

Fig 2: Identifying Sealant Beads - Oil Pan With Front Sump

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

Oil pan with middle sump

Fig 3: Identifying Sealant Beads - Oil Pan With Middle Sump

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.