Camshaft, camshaft adjustment - BA05.20-P-1000-02A
WARNING: This page does not describe the selected car, but rather 28 other vehicles, including the 2012 Mercedes-Benz GL550, 2012 Mercedes-Benz GL450, 2011 Mercedes-Benz ML63, 2011 Mercedes-Benz ML550, and 2011 Mercedes-Benz ML350. However, it is still accessible from the selected car via links, so may be relevant.
Engine 103, 104, 111, 271, 272, 273
Camshaft, camshaft adjustment
| Number | Designation | Engine 111 | Engine 103 | Engine 104 | ||
|---|---|---|---|---|---|---|
| BA05.20-P-1001-02A | Bolt connecting camshaft sprocket/ flange shaft | Stage 1 | Nm | 20 | - | 20 |
| Stage 2 | ∠° | 60 | - | 90 | ||
| BA05.20-P-1002-02A | Center bolt connecting camshaft adjuster to camshaft | Stage 1 | Nm | 5 | - | 5 |
| Stage 2 | ∠° | 90 | - | 90 | ||
| BA05.20-P-1003-02A | Nut connecting camshaft gear to flange shaft | Nm | 65 | - | 65 | |
| BA05.20-P-1004-02A | Bolt connecting camshaft bearing cap | Nm | 21 | 21 | 21 | |
| BA05.20-P-1005-02A | Bolt connecting camshaft sprocket to flange shaft Hexagon bolt+washer | M7x12 | Nm | - | - | 18 |
| BA05.20-P-1006-02A | Bolt connecting camshaft sprocket to flange shaft internal Torx bolt | M7 | Nm | - | 16 | 22 |
| BA05.20-P-1007-02A | Bolt connecting camshaft bearing housing, upper and lower part to cylinder head | Stage 1 | Nm | - | - | - |
| Stage 2 | ∠° | - | - | - | ||
| BA05.20-P-1008-02A | Bolt connecting camshaft solenoid to front cover on the cylinder head | Nm | - | - | - | |
| BA05.20-P-1009-02A | Center valve of pulse wheel/camshaft adjuster to camshaft | Nm | - | - | - | |
| BA05.20-P-1010-02A | Bolt connecting auxiliary bearing cap to cylinder head | Nm | - | - | - | |
Camshaft, camshaft adjustment
| Number | Designation | Engine 271 | Engine 272 | Engine 273 | ||
|---|---|---|---|---|---|---|
| BA05.20-P-1001-02A | Bolt of camshaft sprocket/flange shaft | Stage 1 | Nm | - | - | - |
| Stage 2 | ∠° | - | - | - | ||
| BA05.20-P-1002-02A | Center bolt connecting camshaft adjuster to camshaft | Stage 1 | Nm | 90 | 145 | 145 |
| Stage 2 | ∠° | - | - | - | ||
| BA05.20-P-1003-02A | Nut connecting camshaft gear to flange shaft | Nm | - | - | - | |
| BA05.20-P-1004-02A | Bolt of camshaft bearing cap | Nm | - | - | - | |
| BA05.20-P-1005-02A | Bolt connecting camshaft sprocket to flange shaft Hexagon bolt+washer | M7x12 | Nm | - | - | - |
| BA05.20-P-1006-02A | Bolt connecting camshaft sprocket to flange shaft internal Torx bolt | M7 | Nm | - | - | - |
| BA05.20-P-1007-02A | Bolt connecting camshaft bearing housing, upper and lower part to cylinder head | Stage 1 | Nm | 10 | - | - |
| Stage 2 | ∠° | 90 | - | - | ||
| BA05.20-P-1008-02A | Bolt connecting camshaft solenoid to front cover on the cylinder head | Nm | 8 | - | - | |
| BA05.20-P-1009-02A | Center valve of pulse wheel/camshaft adjuster to camshaft | Nm | - | 145 | 145 | |
| BA05.20-P-1010-02A | Bolt connecting auxiliary bearing cap to cylinder head | Nm | - | 8 | 8 | |