LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2008 >> GL320 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 13 (Engine Timing - 164 Chassis) >> Testing & Repair >> Inspect valves - AR05.30-P-4201 >> Inspect valves - AR05.30-P-4201-01SLR

Inspect valves - AR05.30-P-4201-01SLR

WARNING: This page does not describe the selected car, but rather 28 other vehicles, including the 2012 Mercedes-Benz GL550, 2012 Mercedes-Benz GL450, 2011 Mercedes-Benz ML63, 2011 Mercedes-Benz ML550, and 2011 Mercedes-Benz ML350. However, it is still accessible from the selected car via links, so may be relevant.
MODIFICATION NOTES

29.11.05 Height of the valve disk, exhaust new value, intake, new value Engine 155 *BE05.30-P-1002-01E 
29.11.05 Valve stem diameter for exhaust intake N Engine 155 *BE05.30-P-1004-01E 
TEST VALUES FOR VALVES

Number Designation Engine 155 Engine 156
BE05.30-P-1001-01E Valve disk dia. Exhaust mm 43 (±0.1) 43 (±0.1)
Intake mm 38 (±0.1) 40 (±0.1)
BE05.30-P-1002-01E Valve disk height Exhaust when new mm 2.1 (± 0.1) 2.1 (± 0.1)
Intake valve when new mm 1.7 (± 0.1) 1.48 (± 0.1)
BE05.30-P-1003-01E Valve seat angle (α) Exhaust ∠° 45 (±15') 45 (±15')
Intake ∠° 45 (±15') 45 (±15')
BE05.30-P-1004-01E Valve stem dia. Exhaust mm 6.97 (-0.02) 6.97 (-0.02)
Intake mm 6.975 (-0.015) 5.98 (-0.015)
BE05.30-P-1005-01E Valve length Exhaust mm 121.80 (± 0.2) 121.80 (±0.2)
Intake mm 119.10 (± 0.2) 106.67 (± 0.2)
Fig 1: Identifying Valve Dimensions
G04958311Courtesy of MERCEDES-BENZ OF NORTH AMERICA.