Test values for valve guides - BE05.30-P-1000-02D
WARNING: This page does not describe the selected car, but rather 28 other vehicles, including the 2012 Mercedes-Benz GL550, 2012 Mercedes-Benz GL450, 2011 Mercedes-Benz ML63, 2011 Mercedes-Benz ML550, and 2011 Mercedes-Benz ML350. However, it is still accessible from the selected car via links, so may be relevant.
Engine 112, 113, 155
Inspection and setting data of valve guides
| Number | Designation | Engine 112 except 112.951/976, Engines 113.940/941/942/943/944/945/946/948/960/961/962/963/964/965/966/967/968/969/971/980/981/982/984/986/987/988/990/991/992/993/995 | Engines 112.951/976 | ||
|---|---|---|---|---|---|
| BE05.30-P-1001-02D | Outside diameter of exhaust and intake valve guide | Standard series | mm | 12.540...12.551 | 12.540...12.551 |
| Standard I series (color: blue) | mm | 12.560...12.571 | 12.560...12.571 | ||
| Repair stage I (color: red) | mm | 12.740...12.751 | 12.740...12.751 | ||
| Repair stage II (color: yellow) | mm | 13.140...13.151 | 13.140...13.151 | ||
| BE05.30-P-1002-02D | Bore diameter in cylinder head of exhaust and intake valve guide | Standard series | mm | 12.500...12.511 | 12.500...12.511 |
| Standard I series (color: blue) | mm | 12.520...12.531 | 12.520...12.531 | ||
| Repair stage I (color: red) | mm | 12.700...12.711 | 12.700...12.711 | ||
| Repair stage II (color: yellow) | mm | 13.100...13.111 | 13.100...13.111 | ||
| BE05.30-P-1003-02D | Overlap in cylinder head | mm | 0.029...0.051 | 0.029...0.051 | |
| BE05.30-P-1004-02D | Length | L | mm | 50 | 50 |
| BE05.30-P-1005-02D | Dimension | A | mm | 14.3 (±0.2) | 14.3 (±0.2) |
Test and adjustment values for valve guides
| Number | Designation | Engine 113.989 | Engine 155.980 | ||
|---|---|---|---|---|---|
| BE05.30-P-1001-02D | Outer-ø of exhaust and intake valve guide | Standard series | mm | 12.540...12.551 | 12.540...12.551 |
| Standard I series (color: blue) | mm | 12.560...12.571 | 12.560...12.571 | ||
| Repair stage I (color: red) | mm | 12.740....12.751 | 12.740...12.751 | ||
| Repair stage II (color: yellow) | mm | 13.140...13.151 | 13.140...13.151 | ||
| BE05.30-P-1002-02D | Bore diameter in cylinder head of exhaust and inlet valve guide | Standard series | mm | 12.500...12.511 | 12.500...12.511 |
| Standard I series (color: blue) | mm | 12.520...12.531 | 12.520...12.531 | ||
| Repair stage I (color: red) | mm | 12.700...12.711 | 12.700...12.711 | ||
| Repair stage II (color: yellow) | mm | 13.100...13.111 | 13.100...13.1111 | ||
| BE05.30-P-1003-02D | Overlap in cylinder head | mm | 0.029...0.051 | 0.029...0.051 | |
| BE05.30-P-1004-02D | Length | L | mm | 50 | 50 |
| BE05.30-P-1005-02D | Dimension | A | mm | 14.3 (±0.2) | 14.3 (±0.2) |