Check values for valve seat rings - BE05.30-P-1000-03C
WARNING: This page does not describe the selected car, but rather 28 other vehicles, including the 2012 Mercedes-Benz GL550, 2012 Mercedes-Benz GL450, 2011 Mercedes-Benz ML63, 2011 Mercedes-Benz ML550, and 2011 Mercedes-Benz ML350. However, it is still accessible from the selected car via links, so may be relevant.
Engine 112, 113, 137, 155, 275, 285
Modification notes
| 24.9.04 | For valve seat ring overlap in the cylinder head Value modified from 0.084...0.0100 mm to 0.074...0.100 mm | Value in series 1004 for engine 113.960/961/962/963/965/967/968/980/981/982/984/987/988/990/991/992 modified | |
| 7.10.04 | Tolerance figures changed for valve seat angle | ||
| 26.10.04 | Test value for gap between separating surface of cylinder head and end face of valve seat ring changed from 9.84...9.92 mm exhaust to 9.57...9.65 mm exhaust | Changed for engine 113.960/961/962/963/965/967/968/980/981/982/984/987/988/990/991/992/993 and for engine 113.989 |
Check values for valve seat rings
| Number | Designation | Engines 112.910/911 | Engines 112.912/914/915/920/921/922/923/940/941/942/943/944/945/946/947/948/951/960/961, 113.940/941/942/943/944 | |||
|---|---|---|---|---|---|---|
| BE05.30-P-1001-03C | Intake valve seat ring outer- ø | Standard | mm | 31.1 (+0.015) | 37.1 (+0.015) | |
| Rep. size 1 | mm | 32.1 | 38.3 | |||
| BE05.30-P-1002-03C | Exhaust valve seat ring outer outside diameter | Standard | mm | 35, 1 (-0, 01) | 42, 1 (-0, 01) | |
| Rep. size 1 | mm | 36, 3 | 43, 3 | |||
| BE05.30-P-1003-03C | Height of valve seat ring | Intake | Standard | mm | 5.9 (-0.08) | 5.9 (-0.08) |
| Rep. size 1 | mm | 5.9 (-0.08) | 5.9 (-0.08) | |||
| Exhaust | Standard | mm | 7.9 (-0.08) | 7.9 (-0.08) | ||
| Rep. size 1 | mm | 7.9 (-0.08) | 7.9 (-0.08) | |||
| BE05.30-P-1004-03C | Valve seat ring - overlap in cylinder head | Intake | mm | 0.084...0.115 | 0.084...0.115 | |
| Exhaust | mm | 0.074...0.100 | 0.074...0.100 | |||
| BE05.30-P-1005-03C | Distance between contact face of cylinder head and end face of valve seat ring | Intake | mm | 6.86...6.94 | 8.22...8.30 | |
| Exhaust | mm | 9.72...9.80 | 9.12...9.20 | |||
| BE05.30-P-1006-03C | Basic bore diameter of inlet valve seat rings in cylinder head | Standard | mm | 31.000...31.016 | 37.000...37.016 | |
| Rep. size 1 | mm | 32.000...32.016 | 38.200...38.216 | |||
| BE05.30-P-1007-03C | Basic bore diameter of exhaust valve seat rings in cylinder head | Standard | mm | 35.000...35.016 | 42.000...42.016 | |
| Rep. size 1 | mm | 36.200...36.216 | 43.200...43.216 | |||
| BE05.30-P-1008-03C | Bore depth of valve seat rings in cylinder head | Intake | Standard | mm | 12.76 | 14.12 |
| Exhaust | Standard | mm | 17.62 | 17.02 | ||
| BE05.30-P-1009-03C | Inlet valve/exhaust valve seat | Width | mm | 0.8...1.2 | 0.8...1.2 | |
| Angle (α) | ∠ ° | 45(+30') | 45(+30') | |||
| Correction | Angle (β) | ∠ ° | 35 (± 15') | 35 (±15') | ||
| Correction | Angle (γ) | ∠ ° | 58 (± 15') | 58 (±15') | ||
Check values for valve seat rings
| Number | Designation | Engine 112.960/961 AMG | Engine 112.976 | |||
|---|---|---|---|---|---|---|
| BE05.30-P-1001-03C | Intake valve seat ring outer- ø | Standard | mm | 37.1 (+0.015) | 39.1 (+0.015) | |
| Rep. size 1 | mm | 38.3 | 40.30 | |||
| BE05.30-P-1002-03C | Exhaust valve seat ring outer-ø | Standard | mm | 42.1 (-0.01) | 44.1 (-0.01) | |
| Rep. size 1 | mm | 43.3 | 45.30 | |||
| BE05.30-P-1003-03C | Height of valve seat ring | Intake | Standard | mm | 5.9 (-0.08) | 5.9 (-0.08) |
| Rep. size 1 | mm | 5.9 (-0.08) | 5.9 (-0.08) | |||
| Exhaust | Standard | mm | 7.9 (-0.08) | 7.9 (-0.08) | ||
| Rep. size 1 | mm | 7.9 (-0.08) | 7.9 (-0.08) | |||
| BE05.30-P-1004-03C | Valve seat ring - overlap in cylinder head | Intake | mm | 0.084...0.115 | 0.084...0.115 | |
| Exhaust | mm | 0.074...0.100 | 0.074...0.100 | |||
| BE05.30-P-1005-03C | Distance between contact face of cylinder head and end face of valve seat ring | Intake | mm | 8.22...8.30 | 8.50...8.58 | |
| Exhaust | mm | 9.12...9.20 | 9.57...9.65 | |||
| BE05.30-P-1006-03C | Basic bore diameter of inlet valve seat rings in cylinder head | Standard | mm | 37.000...37.016 | 39.000...39.016 | |
| Rep. size 1 | mm | 38.200...38.216 | - | |||
| BE05.30-P-1007-03C | Basic bore diameter of exhaust valve seat rings in cylinder head | Standard | mm | 42.000...42.016 | 44.000...44.016 | |
| Rep. size 1 | mm | 43.200...43.216 | - | |||
| BE05.30-P-1008-03C | Bore depth of valve seat rings in cylinder head | Intake | Standard | mm | 14.12 | 14.40 |
| Exhaust | Standard | mm | 17.02 | 17.47 | ||
| BE05.30-P-1009-03C | Inlet valve/exhaust valve seat | Width | mm | 0.80...1.2 | 0.8...1.2 | |
| Angle (α) | ∠° | 45(+30') | 45(+30') | |||
| Correction | Angle (β) | ∠° | 35 (± 15') | 35 (±15') | ||
| Correction | Angle (γ) | ∠° | 58 (± 15') | 58 (±15') | ||
Check values for valve seat rings
| Number | Designation | Engine 113.960/961/962/963/964/965/967/968/971/980/981/982/984/987/988/990/991/992/993/995 | Engine 137.970 | |||
|---|---|---|---|---|---|---|
| BE05.30-P-1001-03C | Intake valve seat ring outer- ø | Standard | mm | 39.1 (+0.015) | 34.1 | |
| Rep. size 1 | mm | 40.3 | 35.3 | |||
| BE05.30-P-1002-03C | Exhaust valve seat ring outer-ø | Standard | mm | 44.1 (-0.01) | 37.1 | |
| Rep. size 1 | mm | 45.3 | 38.3 | |||
| BE05.30-P-1003-03C | Height of valve seat ring | Intake | Standard | mm | 5.9 (-0.08) | 5.9 (-0.08) |
| Rep. size 1 | mm | 5.9 (-0.08) | 5.9 (-0.08) | |||
| Exhaust | Standard | mm | 7.9 (-0.08) | 5.9 (-0.08) | ||
| Rep. size 1 | mm | 7.9 (-0.08) | 5.9 (-0.08) | |||
| BE05.30-P-1004-03C | Valve seat ring - overlap in cylinder head | Intake | mm | 0.084...0.115 | 0.084...0.115 | |
| Exhaust | mm | 0.074...0.100 | 0.084...0.115 | |||
| BE05.30-P-1005-03C | Distance between contact face of cylinder head and end face of valve seat ring | Intake | mm | 8.50...8.58 | 8.16...8.36 | |
| Exhaust | mm | 9.57...9.65 | 7.99...8.19 | |||
| BE05.30-P-1006-03C | Basic bore diameter of inlet valve seat rings in cylinder head | Standard | mm | 39.000...39.016 | 34.000...34.016 | |
| Rep. size 1 | mm | 40.200...40.216 | 35.200...35.216 | |||
| BE05.30-P-1007-03C | Basic bore diameter of exhaust valve seat rings in cylinder head | Standard | mm | 44.000...44.016 | 37.000...37.016 | |
| Rep. size 1 | mm | 45.200...45.216 | 38.200...38.216 | |||
| BE05.30-P-1008-03C | Bore depth of valve seat rings in cylinder head | Intake | Standard | mm | 14.40 | 13.99 |
| Exhaust | Standard | mm | 17.47 | 14.16 | ||
| BE05.30-P-1009-03C | Inlet valve/exhaust valve seat | Width | mm | 0.80...1.2 | 0.75...0.95 | |
| Angle (α) | ∠° | 45(+30') | 45(+30') | |||
| Correction | Angle (β) | ∠° | 35 (± 15') | 35 (±15') | ||
| Correction | Angle (γ) | ∠° | 58 (± 15') | 58 (±15') | ||
Check values for valve seat rings
| Number | Designation | Engine 113.989 | Engine 155 | |||
|---|---|---|---|---|---|---|
| BE05.30-P-1001-03C | Intake valve seat ring outer- ø | Standard | mm | 39.1 (+0.015) | 37.1 | |
| Rep. size 1 | mm | 40.3 | 38.3 | |||
| BE05.30-P-1002-03C | Exhaust valve seat ring outer-ø | Standard | mm | 44.1 (-0.01) | 42.1 | |
| Rep. size 1 | mm | 45.3 | 43.3 | |||
| BE05.30-P-1003-03C | Height of valve seat ring | Intake | Standard | mm | 5.9 (-0.08) | 5.9 (-0.08) |
| Rep. size 1 | mm | 5.9 (-0.08) | 5.9 (-0.08) | |||
| Exhaust | Standard | mm | 7.9 (-0.08) | 7.9 (-0.08) | ||
| Rep. size 1 | mm | 7.9 (-0.08) | 7.9 (-0.08) | |||
| BE05.30-P-1004-03C | Valve seat ring - overlap in cylinder head | Intake | mm | 0.084...0.115 | 0.084...0.115 | |
| Exhaust | mm | 0.074...0.0100 | 0.084...0.110 | |||
| BE05.30-P-1005-03C | Distance between contact face of cylinder head and end face of valve seat ring | Intake | mm | 8.50...8.58 | 8.22...8.30 | |
| Exhaust | mm | 9.57...9.65 | 9.12...9.20 | |||
| BE05.30-P-1006-03C | Basic bore diameter of inlet valve seat rings in cylinder head | Standard | mm | 39.000...39.016 | 37.000...37.016 | |
| Rep. size 1 | mm | 40.200...40.216 | 38.200...38.216 | |||
| BE05.30-P-1007-03C | Basic bore diameter of exhaust valve seat rings in cylinder head | Standard | mm | 44.000...44.016 | 42.000...42.016 | |
| Rep. size 1 | mm | 45.200...45.216 | 43.200...43.216 | |||
| BE05.30-P-1008-03C | Bore depth of valve seat rings in cylinder head | Intake | Standard | mm | 14.40 | 14.12 |
| Exhaust | Standard | mm | 17.47 | 17.02 | ||
| BE05.30-P-1009-03C | Inlet valve/exhaust valve seat | Width | mm | 0.80...1.2 | 0.60...0.65 | |
| Angle (α) | ∠° | 45(+30') | 45(+30') | |||
| Correction | Angle (β) | ∠° | 35 (±15') | 35 (± 15') | ||
| Correction | Angle (γ) | ∠° | 58 (± 15') | 58 (± 15') | ||
Check values for valve seat rings
| Number | Designation | Engines 275.285 | |||
|---|---|---|---|---|---|
| BE05.30-P-1001-03C | Intake valve seat ring outer- ø | Standard | mm | 32.1 | |
| Rep. size 1 | mm | 33.3 | |||
| BE05.30-P-1002-03C | Exhaust valve seat ring outer-ø | Standard | mm | 36.1 | |
| Rep. size 1 | mm | 37.3 | |||
| BE05.30-P-1003-03C | Height of valve seat ring | Intake | Standard | mm | 5.9 (-0.08) |
| Rep. size 1 | mm | 5.9 (-0.08) | |||
| Exhaust | Standard | mm | 5.9 (-0.08) | ||
| Rep. size 1 | mm | 5.9 (-0.08) | |||
| BE05.30-P-1004-03C | Valve seat ring - overlap in cylinder head | Intake | mm | 0.084...0.115 | |
| Exhaust | mm | 0.084...0.115 | |||
| BE05.30-P-1005-03C | Distance between contact face of cylinder head and end face of valve seat ring | Intake | mm | 8.410...8.418 | |
| Exhaust | mm | 8.530...8.538 | |||
| BE05.30-P-1006-03C | Basic bore diameter of inlet valve seat rings in cylinder head | Standard | mm | 32.000...32.016 | |
| Rep. size 1 | mm | 33.185...33.216 | |||
| BE05.30-P-1007-03C | Basic bore diameter of exhaust valve seat rings in cylinder head | Standard | mm | 36.000...36.016 | |
| Rep. size 1 | mm | 37.185...37.216 | |||
| BE05.30-P-1008-03C | Bore depth of valve seat rings in cylinder head | Intake | Standard | mm | 14.31 |
| Exhaust | Standard | mm | 14.43 | ||
| BE05.30-P-1009-03C | Inlet valve/exhaust valve seat | Width | mm | 0.75...0.95 | |
| Angle (α) | ∠ ° | 45(+30') | |||
| Correction | Angle (β) | ∠° | 35 (± 15') | ||
| Correction | Angle (γ) | ∠° | 58 (± 15') | ||