Separate oil pump chain - AR18.10-P-2140-01AMG

WARNING: This page does not describe the selected car, but rather 28 other vehicles, including the 2012 Mercedes-Benz GL550, 2012 Mercedes-Benz GL450, 2011 Mercedes-Benz ML63, 2011 Mercedes-Benz ML550, and 2011 Mercedes-Benz ML350. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Case (602 589 00 98 00)

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

Fig 2: Identifying Thrust Spindle (271 589 10 63 00)

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

Fig 3: Identifying Chain Separating Tool (602 589 02 33 00)

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

Screw the pressure screw (02) with the pressure pin (02a) into the chain separating tool (03).
Fit chain separating tool (03)onto oil pump chain.
Screw in pressure screw (02).
Screw in the pressure screw until the pressure pin (02a)is lying against the pin (arrow) on the oil pump chain.
Screw in pressure pin (02a)and press out bolt on oil pump chain.

Fig 4: Identifying Pressure Screw, Pressure Pin And Chain Separating Tool
Courtesy of MERCEDES-BENZ OF NORTH AMERICA.
Unscrew pressure screw (02) and remove chain separating tool (03).
Remove bolt (1) for oil pump chain from chain separating tool (03).

Fig 5: Identifying Pressure Screw And Chain Separating Tool
Courtesy of MERCEDES-BENZ OF NORTH AMERICA.