LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2008 >> GL320 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 10 (Lubrication, Oil Cooling - 164 Chassis) >> Testing & Repair >> Replace the oil pump chain - AR18.10-P-2140GZS (ML63 AMG) >> Rivet oil pump chain - AR18.10-P-2140-02AMG

Rivet oil pump chain - AR18.10-P-2140-02AMG

WARNING: This page does not describe the selected car, but rather 28 other vehicles, including the 2012 Mercedes-Benz GL550, 2012 Mercedes-Benz GL450, 2011 Mercedes-Benz ML63, 2011 Mercedes-Benz ML550, and 2011 Mercedes-Benz ML350. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Case (602 589 00 98 00)
G04958516Courtesy of MERCEDES-BENZ OF NORTH AMERICA.
Fig 2: Identifying Riveting Tool (602 589 00 39 00)
G04958517Courtesy of MERCEDES-BENZ OF NORTH AMERICA.
Fig 3: Identifying Thrust Spindle (271 589 10 63 00)
G04958518Courtesy of MERCEDES-BENZ OF NORTH AMERICA.
Fig 4: Identifying Assembly Link (271 589 02 40 00)
G04958519Courtesy of MERCEDES-BENZ OF NORTH AMERICA.
Fig 5: Identifying Assembly Inserts (271 589 02 63 00)
G04958520Courtesy of MERCEDES-BENZ OF NORTH AMERICA.
  1. Connect new oil pump chain (2)and old oil pump chain (1)together using an SPECIAL TOOL assembly link (3).
  2. Slowly rotate crankshaft in the direction of engine rotation (arrowed) until it is possible to connect both ends of new oil pump chain (2).
  3. SPECIAL TOOL Remove assembly link (3) and old oil pump chain (1).
    Fig 6: Identifying Oil Pump Chain And Assembly Link
    G04958521Courtesy of MERCEDES-BENZ OF NORTH AMERICA.
  4. Connect ends of new oil pump chain (2) using a riveted link (4).

    IMPORTANT Insert riveted link (4) from front.

    Fig 7: Identifying Oil Pump Chain And Riveted Link
    G04958522Courtesy of MERCEDES-BENZ OF NORTH AMERICA.
  5. SPECIAL TOOL Place assembly insert with digit F10 into SPECIAL TOOL rivet press tool (arrow) and fix in place by a bolt (28).
    Fig 8: Identifying Digit F10, Rivet Press Tool And Bolt
    G04958523Courtesy of MERCEDES-BENZ OF NORTH AMERICA.
  6. SPECIAL TOOLSPECIAL TOOL Place moveable assembly insert with digit D10 into rivet press tool (arrow).
    Fig 9: Identifying Digit D10 Into Rivet Press Tool
    G04958524Courtesy of MERCEDES-BENZ OF NORTH AMERICA.
  7. Lay outer plate into the SPECIAL TOOL assembly insert with digit D10 (arrow).
    Fig 10: Locating Digit D10
    G04958525Courtesy of MERCEDES-BENZ OF NORTH AMERICA.
  8. SPECIAL TOOL Place rivet press tool on oil pump chain.

    IMPORTANT Fit in such a way that the rollers of the riveted link (4)rest on the spacer web (arrow).

  9. SPECIAL TOOL Tighten pressure screw (6) until a firm resistance is felt.

    IMPORTANT While turning the SPECIAL TOOL pressure screw (6), ensure that pin in rivet link (4) is inserted in holes in the external mounting link (5).

  10. SPECIAL TOOL Remove rivet press tool.
    Fig 11: Locating Spacer Web
    G04958526Courtesy of MERCEDES-BENZ OF NORTH AMERICA.
  11. SPECIAL TOOL Move assembly insert with digit D10 onto rivet profile (arrow).
    Fig 12: Locating Rivet Profile
    G04958527Courtesy of MERCEDES-BENZ OF NORTH AMERICA.
  12. SPECIAL TOOL Place rivet press tool on oil pump chain riveted link (4).

    IMPORTANT Fit the in such a way that pins for the riveted link (4) are located exactly in the center of V-type support (arrow).

  13. SPECIAL TOOL Tighten pressure screw (6).

    IMPORTANT The torque applied to SPECIAL TOOL pressure screw (6) is about 30 to 35 Nm (reference value).

  14. Rivet bolts for riveted link (4) individually.
    Fig 13: Locating V-Type Support
    G04958528Courtesy of MERCEDES-BENZ OF NORTH AMERICA.
  15. INSPECT Check riveted joint (arrows) for bolt; re-rivet bolt if necessary.
    Fig 14: Locating Riveted Joint
    G04958529Courtesy of MERCEDES-BENZ OF NORTH AMERICA.
scientia non olet · About LEMON Manuals