Separate oil pump chain - AR18.10-P-2140-01V

WARNING: This page does not describe the selected car, but rather 28 other vehicles, including the 2012 Mercedes-Benz GL550, 2012 Mercedes-Benz GL450, 2011 Mercedes-Benz ML63, 2011 Mercedes-Benz ML550, and 2011 Mercedes-Benz ML350. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Case (602 589 00 98 00)

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

Fig 2: Identifying Thrust Spindle (602 589 05 63 00)

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

Fig 3: Identifying Chain Separating Tool (602 589 02 33 00)

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

Fig 4: Identifying Thrust Pins (602 589 05 63 01)

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

Screw pressure screw (02) with pressure pin (02a) into chain-separating tool (03).
Fit chain separating tool (03) onto oil pump chain.
Screw in pressure screw (02) as far as necessary until the closely at the oil pump chain pin (arrow).
Screw in pressure pin (02a) and press out oil pump chain pin.

Fig 5: Identifying Pressure Screw, Pressure Pin And Chain Spring Tool
Courtesy of MERCEDES-BENZ OF NORTH AMERICA.
Unscrew pressure screw (02) and remove chain separating tool (03).
Remove oil pump chain pin (1) from chain separating tool (03).

Fig 6: Identifying Pressure Screw And Chain Spring Tool
Courtesy of MERCEDES-BENZ OF NORTH AMERICA.