LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2008 >> GL320 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 10 (Lubrication, Oil Cooling - 164 Chassis) >> Testing & Repair >> Measure oil consumption - AR18.00-P-0025GZS (ML63 AMG) >> Notes

Measure oil consumption - AR18.00-P-0025GZS (ML63 AMG): Notes

WARNING: This page does not describe the selected car, but rather 28 other vehicles, including the 2012 Mercedes-Benz GL550, 2012 Mercedes-Benz GL450, 2011 Mercedes-Benz ML63, 2011 Mercedes-Benz ML550, and 2011 Mercedes-Benz ML350. However, it is still accessible from the selected car via links, so may be relevant.

ENGINE 156 in MODEL 164, 216, 221, 251 

INSPECT Checking    
DANGER Risk of death  caused by vehicle slipping or toppling off the lifting platform. Align vehicle between columns of vehicle lift and position four support plates at vehicle lift support points specified by vehicle manufacturer. AS00.00-Z-0010-01A
DANGER Risk of accident  caused by vehicle starting off by itself when engine is running. Risk of injury  caused by contusions and burns during starting procedure or when working near the engine as it is running Secure vehicle to prevent it from moving by itself.
Wear closed and snug-fitting work clothes.
Do not touch hot or rotating parts.
AS00.00-Z-0005-01A
DANGER Risk of injury  to skin and eyes caused by handling hot or glowing objects. Wear safety gloves, protective clothing and safety glasses, if necessary. AS00.00-Z-0002-01A
1 Check outside of ENGINE for oil leakage IMPORTANT Eliminate leaks prior to measuring oil consumption.  
2 Carry out engine oil and filter change IMPORTANT In order to avoid false measurements, for example through fuel in engine oil, the engine oil has to be changed before each oil consumption measuring trip It is not necessary to change engine oil when driven less than 1000 km after last oil change  
3 Start engine and bring to operating temperature    
4 Turn off engine    
5 Weigh engine oil   AR18.00-P-0025-05QB 
6 Conduct measurement run IMPORTANT Conduct test run over a measured distance of 250 km (if measurement carried out by workshop personnel) or 1000 km (if measurement carried out by customer). If measurements are conducted by the workshop personnel, take into account operating conditions of the vehicle at the customer's.  
7 Start engine and bring to operating temperature    
8 Turn off engine    
9 Weigh engine oil again and determine oil consumption NOTES To prevent measurement errors, the new measurement must be carried out at the place of the first oil measurement. AR18.00-P-0025-05QB 
10 If engine oil consumption requires, refill engine oil or conduct repair operations IMPORTANT The oil consumption may be as much as 0.8 liter of oil over 1000 km. The corresponding repair measures must only be carried out if the oil consumption is higher than this.