LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2008 >> GL320 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 10 (Lubrication, Oil Cooling - 164 Chassis) >> Removal & Installation >> Determine oil consumption - SM18.00-P-0002-01A

Determine oil consumption - SM18.00-P-0002-01A

WARNING: This page does not describe the selected car, but rather 28 other vehicles, including the 2012 Mercedes-Benz GL550, 2012 Mercedes-Benz GL450, 2011 Mercedes-Benz ML63, 2011 Mercedes-Benz ML550, and 2011 Mercedes-Benz ML350. However, it is still accessible from the selected car via links, so may be relevant.
REFER TO FORMS Test sheet for excessive oil consumption, form OF18.00-P-3000-03A 
OIL PAN

Number Designation Engine 272
BA01.45-P-1001-01M Oil drain screw to oil pan Nm 30

Weigh engine oil (after consumption measuring drive): 

IMPORTANT The customer visits the workshop due to an oil level warning message.

  1. Weigh empty oil container ("TARE").
  2. Put vehicle on lifting platform when oil temperature is 90°C.

    IMPORTANT The waiting time of 15 min begins when the engine is switched off.

  3. Open oil filler cap and pull oil filter.
  4. Remove under-ride guard and open oil drain screw.
  5. Drain engine oil into oil container and tighten oil drain screw again.

    IMPORTANT Observe the waiting time of 15 min (see operation step 2).

  6. Place filled oil container on scales and weigh.
  7. Determine oil consumption in the way described on test sheet.