Remove/install armrest lid on center console - AR68.20-P-2370GZ

MODEL 164 

Fig 1: Identifying Armrest Lid Remove/Install Components On Center Console

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

	Remove/install
1	Remove rear center console	Do not disconnect electrically	AR68.20-P-2020GZ
2	Remove stowage tray for portable CTEL		AR82.70-P-8921GZ
3	Remove stowage box		AR68.20-P-2320GZ
4	Unclip armrest cover bracket (1) through openings (arrows A)	Installation:  Armrest cover bracket (1) should arrest audibly.
		Long wedge	Figure
5	Pull out armrest cover bracket (1) upward (arrow B)	Unclip one side, pull upward and hold Unclip other side, pull upward Pull armrest cover (1) out by pulling alternately upward (arrows B). Installation:  Ensure rubber grommet (2) is seated correctly.
6	Guide cable (3) through armrest cover bracket (1)
7	Install in the reverse order

Fig 2: Identifying Long Wedge (115 589 03 59 00)

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.