Purge control switchover valve - location/task/design/function - GF47.30-P-4030AM
MODEL 211, 219 with ENGINE 113.990
MODEL 215, 220 with ENGINE 113.991
MODEL 230 with ENGINE 113.992 /995 up to Model Year 2008
MODEL 463 up to 31.5.12 with ENGINE 113.993
| Purge control valve position | Models 211, 219 | GF47.30-P-4030-01TA | |
| Models 215, 220 | GF47.30-P-4030-01MA | ||
| Model 230 | GF47.30-P-4030-01RA | ||
| Model 463 | GF47.30-P-4030-01GA | ||
| Purge control valve task | The purge control valve opens or closes the connecting line (purge line) between the activated charcoal canister and the intake manifold. | ||
| Purge control valve design | The purge control valve is an electric switchover valve with a 2-pin plug connector. | ||
| Purge control valve function | GF47.30-P-4030-02AM |