Positioning vehicle with front wheels on turnplates - AR40.20-P-0200-12AC
- Secure turnplates (3) with locking pins (5).
- Drive the vehicle onto the electronic measuring system and park with the front wheels on the turnplates (3).
Only with fixed turnplates (3) of an electronic measuring system.
The turnplates of an electronic measuring system are shown
- Raise vehicle at front.
- Push turnplates under the front wheels and park the vehicle centrally on the turnplates.
The angled scale on the turnplates must point outwards.
- Move the front wheels into the "straight-ahead" position.
- Remove the locking pins (5) from the turnplates (3).