Remove/install ABS measuring ring - AR42.30-P-0160GX

MODEL 463.270/ 271 

Fig 1: Identifying ABS Measuring Ring Remove/Install Components

Courtesy of MERCEDES-BENZ USA

	Remove/install
1	Remove rear axle shaft		AR35.30-P-0620GX
2	Disassemble rear axle shaft		AR35.30-P-7351GX
3	Clamp input shaft (2).
4	Detach ABS measuring ring (1) from input shaft using a suitable tool.
5	Heat new ABS measuring ring (1) to approx. 80°C and press onto input shaft (2) using a suitable tool.
6	Install in the reverse sequence