Remove/install center console - AR68.20-P-2000US
MODEL 463.237 /246 /249 /271
| Remove/install | |||
| Risk of explosion caused by oxyhydrogen gas. Risk of poisoning and caustic burns caused by swallowing battery acid. Risk of injury caused by burns to skin and eyes from battery acid or when handling damaged lead-acid batteries | No fire, sparks, open flames or smoking. Wear acid-resistant gloves, clothing and glasses. Only pour battery acid into suitable and appropriately marked containers. |
AS54.10-Z-0001-01A | |
| Notes on battery | All models | AH54.10-P-0001-01A | |
| 1 | Switch off ignition and remove ignition key | ||
| 2 | Disconnect battery ground line | AR54.10-P-0003G | |
| 3 | Remove cover from hand brake lever (3) | AR68.20-P-2311-01AA | |
| Figure | |||
| 4 | Disconnect electrical connector from transfer case switch (S97/5) | ||
| 5 | Disconnect electrical connector for ambiance illumination from wooden cover (1) | Only on vehicles with code (FR1) Ambiance illumination | |
| 6 | Remove wooden cover (1) | ||
| 7 | Remove cup holder (A) | ||
| 8 | Remove heater nozzle in rear compartment center console (5) | ||
| 9 | Remove cover (6) with socket (7) | ||
| Figure | |||
| 10 | Remove cover (8) in stowage compartment | ||
| 11.1 | Disconnect connector (9), pull out telephone preinstallation coupling (11), antenna connection cable (12) and connector (9) from center console (10). | In vehicles up to 1.4.07 |
|
| 11.2 | Disconnect connectors from cell phone interface contact plate, antenna cable and info key. | In vehicles as of 2.4.07 |
|
| 12 | Remove center console (10) | ||
| 13 | Install in the reverse order | ||
| 14 | Read out fault memory and erase | Stored faults which can result from cables being disconnected or from simulation during removal and installation or test work, have to be processed and erased in the fault memories after completing the work. |
|
| Connect STAR DIAGNOSIS and read out fault memory | AD00.00-P-2000-04A |