SCN coding of control units - AR54.21-P-0015X

MODEL 129.058/063/067/076, 163, 164, 166, 168, 169, 170, 171, 199, 203, 204, 207, 208, 209, 210, 211, 212, 215, 216, 218, 219, 220, 221, 230, 240, 245, 246, 251, 450, 452, 454, 461.302/304/305/331/332/333/334/340/342/343/344/345/346, 463.206/208/209/232/233/240/241/243/244/245/246/247/248/249/250/254/270/271/303/306/308/309/322/323/332/333/336/340/341/346 

		During the entire work procedure a sufficiently large voltage supply must be provided for the vehicle's on-board electrical system. Otherwise undervoltage damage may occur to the control units.
1	Connect STAR DIAGNOSIS and start Diagnosis Assistance System (DAS)
	Connect STAR DIAGNOSIS and read out fault memory	Model 129, 163, 164, 166, 168, 169, 170, 171, 199, 203, 204, 207, 208, 209, 210, 211, 212, 215, 216, 218, 219, 220, 221, 230, 240, 245, 246, 251, 461, 463	AD00.00-P-2000-04A
		Model 450	AD00.00-P-2000-04SM
		Model 452	AD00.00-P-2000-04RR
		Model 454	AD00.00-P-2000-04FF
2.1	Perform online Software Calibration Number (SCN) coding	With networked STAR DIAGNOSIS diagnostic system	AR54.21-P-0013-01X
2.2	Perform offline Software Calibration Number (SCN) coding	With non-networked STAR DIAGNOSIS diagnostic system	AR54.21-P-0013-04X
3	Read out fault memory, erase if necessary
4	Disconnect STAR DIAGNOSIS