Remove and install DC/AC converter control unit - AR54.21-P-1600GP
MODEL 463.237 /271 with CODE (494) USA version with CODE (XY9) Change year 2009 115V socket
| Remove/install | |||
| 1 | Move front seat to foremost and uppermost position | ||
| 2 | Remove rear bolts connecting seat rails to mounting console | AR91.10-P-1000GN | |
| 3 | Unclip rear cover (1) from plate (2) | ||
| 4 | Move the front seat into the rearmost position | ||
| 5 | Remove front bolts connecting seat rails to mounting console | AR91.10-P-1000GN | |
| 6 | Move front seat to lowermost position and move front seat backrest to front | ||
| 7 | Fold front seat backwards | ||
| 8 | Unclip front cover (1) from plate (2) | ||
| 9 | Take off cover (1) | ||
| 10 | Unscrew nuts of plate (2) from frame floor assembly | ||
| 11 | Remove cable ties (3) | ||
| 12 | Fold plate (2) with E-call control unit (A35/8) to front at side | ||
| 13 | Unscrew nuts (4) of DC/AC converter control unit (N24/3) from plate (2) | ||
| 14 | Disconnect electrical connectors from DC/ AC converter control unit (N24/3) | ||
| 15 | Remove DC/AC converter control unit (N24/3) | ||
| 16 | Install in the reverse order |