Move wiper motor to parking position - AR82.30-P-6800-01T
MODIFICATION NOTES
| 14.1.04 | Disconnect/connect/remove ground lead from battery |
- Connect electrical connector to wiper motor (M6/1).
- Hold wiper motor (M6/1) with one hand.
- Switch on ignition, turn combination switch to "stage 2" and then turn back to "stage 0".
Second person required
- Switch off ignition, if the wiper motor (M6/1) is in parking position.
Second person required
- Disconnect electrical connector at wiper motor (M6/1).