Remove/install water collector - AR83.25-P-1402T
MODEL 211.0/2/6
| Remove/install | |||
|---|---|---|---|
| 1 | Remove wiper arms | AR82.30-P-6100T | |
| 2.1 | Remove multifunction sensor and place to one side with attached cable | On vehicles with code (581b) convenience automatic air conditioning | AR83.40-P-6730T |
| 3 | Remove rubber seal (2) in water collector area (1) | ||
| 4 | Detach gaskets (3) at the wiper shafts | ||
| 5 | Unclip line (4) for windshield washer nozzles | ||
| 6 | Remove expander clips (5) on water collector (1) | ||
| 7 | Unclip water collector (1) in the area of the windshield (arrows) | ||
| 8 | Detach water drain hose (7) on water collector (1) | ||
| 9 | Remove water collector (1) | ||
| 10 | Install in the reverse order |