111 589 25 61 00 Valve assembly tools kit - WS05.00-P-3137BA

FG 05/Set B

ENGINE 104, 111, 112, 113, 119, 120, 122, 132, 134, 135, 155, 156, 159, 160, 166, 266, 271, 272, 273, 601, 602, 603, 604, 605, 606, 611 /980, 612 /965 /966, 613, 628, 629, 639, 640, 642, 646, 647, 648, 651, 660, 668

ENGINE 648.960 in MODEL 220

Separate part	111 589 25 61 06 Thrust fork	FG05/Set C	WS05.00-P-3137-06C
Separate part	111 589 25 61 12 Fixing bracket	FG05/Set C	WS05.00-P-3137-12C
Separate part	111 589 25 61 19 Step spacing	FG05/Set C	WS05.00-P-3137-19C
Separate part	111 589 25 61 03 Lever handle	FG05/Set C	WS05.00-P-3137-03C
Separate part	111 589 25 61 05 Detent depressor	FG05/Set C	WS05.00-P-3137-05C

Use:

Assembly tool for valve springs in a plastic case.

NOTE: For engines with tappet holes in cylinder head assembly of the valve keys is performed automatically by the assembly cartridges.

Fig 1: Identifying Valve Assembly Tools Kit (111 589 25 61 00)

G07505481

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

Consisting of:

Part 1 Empty case

Part 2 Impact pin

Part 3 Lever handle

Part 4 Extension

Part 5 Detent depressor for thrust piece

Part 6 Thrust fork for assembly cartridges

Part 7 Thrust piece for detent depressed

Part 8 Assembly cartridge length 83 mm (gasoline engine)

Part 9 Assembly cartridge length 102 mm (diesel engine)

Part 10 Pilot bushing length 28.6 mm (gasoline engine)

Part 11 Pilot bushing length 53 mm (diesel engine)

Part 12 Retaining fork M 6 X 15 mm

Part 13 Retaining fork M 7 X 25 mm

Part 14 Retaining fork M 7 X 30 (bolt length 60 mm)

Part 15 Retaining fork M 8 X 20 mm

Part 16 Threaded hook M6 X 23 mm

Part 17 Threaded hook M7 X 23 mm

Part 18 Threaded hook M8 X 20 mm

Part 19 Grid with a joint bearing