Apply adhesive material - AR67.10-P-1000-08P

Fig 1: Identifying Intermediate Piece (000 589 86 63 00)

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

REPAIR MATERIALS

Number	Designation	Order number
BR00.45-Z-1015-02A	Repair kit, glazing, installing window, 2-component adhesive	A 220 670 00 93
BR00.45-Z-1089-02A	Repair kit, installing window, 1-component adhesive, replaced by: A 221 670 81 01	A 221 670 21 01
BR00.45-Z-1035-02B	Repair kit, installing windshields, 1-component adhesive	A 221 670 81 01

1.1 Guide application nozzle (2) along body flange (4) and uniformly apply glue (1).
Cartridge gun

gotis://K_67.0_02.0

Not on model 208.3.

Dimensions:

Fig 2: Identifying Application Nozzle And Body Flange With Dimension A
Courtesy of MERCEDES-BENZ OF NORTH AMERICA.
1.2 Guide application nozzle to inside of window (3) along rubber profile (5) and uniformly apply adhesive (1).
Cartridge gun

gotis://K_67.0_02.0

Only on model 208.3.

Dimensions:

Fig 3: Identifying Application Nozzle With Dimension B
Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

Install window on body flange within 10 minutes after applying adhesive material, otherwise adhesive force of adhesive material starts to decrease.

Completely press adhesive residues not required out of cartridge and dispose of. Use adapter to completely press out cartridge of 1-component repair kit Insert between cartridge piston and plate on push rod of cartridge gun.

Shown on body flange on model 230.4

Fig 4: Applying Adhesive Material

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.