Notes on avoiding damage to windows installed in special high-security vehicles - AH67.00-P-0003-01FB

Model 210 with code (Z04) Light armoring or code (Z06) B6-armoring 

Model 211 with code (Z04) Light armoring, 

Model 212 with code (Z04) Light armoring, 

Model 220  with code (Z04) Light armoring or code (Z07) Top protection,

Model 221.1 with code (Z07) Top protection 

The inside of these windows have a plastic coating which is very sensitive to scratching. Even with the smallest case of damage, protection can no longer be guaranteed.

Observe the following instructions to avoid damage:

• Do not affix any adhesive labels.
• Avoid any contact with hard objects (ice scrapers, rings, watches, armbands, etc.)
• Do not use deicing sprays.

When working in the area of these windows: 

• Cover inside of windows with suitable foil.
• Cover sharp edges on doors and on the window frame.
• Always reinstall bolts removed at the same place they were removed.
• Ensure that new bolts are always identical to those installed previously.

When cleaning windows: 

• Use only water for cleaning, possibly adding a small amount of mild dishwashing liquid or soap.
• Clean using only a chamois leather and minimal pressure.