Cut rear glass roof out of panoramic roof* - AR77.21-P-0600-01T

Fig 1: Identifying Cutting Blade (124 589 21 63 00)

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

Fig 2: Identifying Straight Cutting Blade (202 589 17 63 00)

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

COMMERCIALLY AVAILABLE TOOLS

Number	Designation
WH58.30-Z-1003-20A	Multicutter

Press lip (4) on ornamental frame (2) for rear window (3) into gap between rear glass roof (1) and rear window (3).*
Cut off ornamental frame (2) on rear glass roof (1) with carpet knife.*
Carpet knife with blade length of approx. 9 mm.*

Fig 3: Identifying Lip, Ornamental Frame, Rear Window And Rear Glass Roof
Courtesy of MERCEDES-BENZ OF NORTH AMERICA.
Clamp straight 35 mm long cutting blade into multicutter.*
Moisten oil stone and sharpen straight 35 mm long cutting blade on both sides with multicutter switched on.*
Cut out rear glass roof (1) in areas "A" from inside.*
Cut out rear glass roof (1) in areas "B" from outside.*
Clamp cutting blade (50 mm long) into multicutter.*
Moisten oil stone and sharpen cutting blade (50 mm long) on both sides with multicutter switched on.*

Fig 4: Identifying Rear Glass Roof Areas
Courtesy of MERCEDES-BENZ OF NORTH AMERICA.
Cut out rear glass roof (1) in area "C" from outside.*
When cutting out in area "C", guide cutting blade (50 mm long) as close as possible along glass roof (1) so that lip on rear window ornamental frame is not damaged.*