headlamp actuation, function - GF82.10-P-2009T
MODEL 211.0 /2 up to 31.5.06 with CODE (614) Bi-xenon headlamp unit with CODE (615) Bi-xenon headlamp unit with integrated curve illumination except CODE (494) USA version except CODE (498) Japan version
MODEL 211.0 /2 up to 30.6.06 with CODE (614) Bi-xenon headlamp unit with CODE (615) Bi-xenon headlamp unit with integrated curve illumination with CODE (494) USA version with CODE (498) Japan version
Driving lights actuation encompasses the control of low beam and high beam.
Actuation alternatives for low beam:
- Manually via the exterior lamp switch (S1)
- Automatically through the rain/light sensor (B38/2) when the exterior lamp switch (S1) is in the "Auto" position
- Automatically through the daytime running lamps function (must be activated in the instrument cluster (A1))
For reason of legal provisions the function cannot be deactivated on the national versions
,
,
,
,
and
.
Actuation alternatives for high beam
- Manually via the combination switch (S4)
Headlamp range adjustment
Automatic headlamp range adjustment is specified by law on vehicles with xenon headlamps.
Headlamp range adjustment automatically keeps the incline angle of the driving lights within the legally set limits, irrespective of the vehicle load.
Switched-on lights reminder
If the transmitter key (A8/1) is removed and the driver-side door is open when the exterior lights are switched on an acoustic lights on warning function is triggered.
| Low-beams actuation, function | GF82.10-P-3002T |
| Automatic driving light actuation, function | GF82.10-P-3003T |
| Daytime running light control, function | GF82.10-P-3005T |
| High-beams actuation, function | GF82.10-P-3004TT |
| Headlamp range adjustment (LWR) headlamp, function | GF82.10-P-1001TT |
| Light warning, function | GF82.10-P-2008T |